Steven had previously purchased a set of custom hand built ENVE SES 8.9 clinchers with red Chris King R45 hubs. He uses them for Ironman and triathlon competitions. This fall, he ordered this set. Sticking with the same red CK R45 hubs, he chose the very balance all-rounder ENVE SES 4.5 clincher rim, a new…Read more Steven’s custom ENVE SES 4.5 clincher wheels
enve
Brent’s ENVE SES 45/Tune build
As I posted earlier, Brent had a set of Hadley disc hubs built onto two rear ENVE SES 3.4 clincher rims, the 45mm tall rear version, 24h. He figured they'd do him better on his road bike so asked ZED to build the rims onto Tune Mig 70 front (72g) and Mag 170 rear 11…Read more Brent’s ENVE SES 45/Tune build
Steve’s custom ENVE 3.4/Tune wheelset
Steve's custom ENVE 3.4 clincher is the perfect package. The convenience of a clincher rim combined with the extreme weight savings of the Tune Mag 170 and Mig 70 hub set, pulled together with lightweight and strong Sapim CX-Ray spokes. 20h front, 24h rear drillings, this wheelset is a fantastic all-rounder wheelset. At 1420g for…Read more Steve’s custom ENVE 3.4/Tune wheelset
Steve’s ENVE 8.9/Chris King R45 clinchers
Steve's a triathlete in Calgary and knew exactly what he was after.. no holds barred ENVE SES 8.9 clincher wheelset with red Chris King R45 hubs, CX-Ray spokes. The perfect weapon for any triathlete wanting to buy performance.
Richard’s ENVE 6.7 Clincher Wheelset
Richard is a commercial photographer and film maker. He is also an avid cyclist. This wheelset is for his new project bike. These look like factory ENVE wheels, but are in fact hand built by ZED Wheel Works. ENVE SES 6.7 clinchers laced to DT Swiss 240s hubs, 11 speed compatible, Sapim CX-Ray spokes. ENVE…Read more Richard’s ENVE 6.7 Clincher Wheelset
Dušan’s ENVE 26 AM Chris King custom wheelset
Custom ENVE Composites AM 26 mountain bike wheelset build with Chris King hubs and CX-Ray spokes.
Enve 3.4 updates
Pro City Racing road team mates Alex and Jamie both bought Enve 3.4 tubular race wheels for the 2012 road racing season. They'd selected some very exotic and lightweight, made in the usa, C-4 hubs. This choice proved to be lacking durability that previous models had. So, Zed Wheels replaced the C-4 hubs on the…Read more Enve 3.4 updates
Josh’s Enve 65/Tune Mag 170 & Mig 70 wheelset
For the 2012 road racing season, Josh took advantage of the Pro City Racing road team pricing and purchased a Trek Madone team bike. For racing, he went with these custom ENVE 65 tubular wheelset. Features are: Enve 65 tubular rims Tune Mag 170 rear hub Tune Mig 70 front hub Sapim CX-Ray spokes Weight:…Read more Josh’s Enve 65/Tune Mag 170 & Mig 70 wheelset
Jamie’s custom Enve 3.4 wheelset
Jamie, the team captain of Pro City Racing road team, was quite excited about Zed Wheels sponsoring the team in partnership with Enve Composites. After going back and forth between the Enve 6.7s and the Enve 3.4s, he settled on the Enve 3.4s. He did some research and asked for a very lightweight straight-pull hub…Read more Jamie’s custom Enve 3.4 wheelset
Kevin’s ENVE 45/65 wheelset
Kevin was looking for an all-rounder wheelset with an emphasis on aerodynamics. As a sponsored Pro City Racing road team member, Kevin took full advantage of the sponsorship deal courtesy Zed Wheels and ENVE Composites. The rear is an ENVE 65 clincher laced to a black Alchemy ORC 24h rear hub with CX-Ray spokes. The…Read more Kevin’s ENVE 45/65 wheelset
Alex’s custom ENVE 3.4 team wheelset
A 2012 Pro City Racing road team member, Alex wanted a a fast all rounder racing wheelset for his custom Trek Madone Project One bike. He chose the light and very aero ENVE 3.4 tubulars. What he got was an 1150g custom hand built wheelset that will certainly cheat its way through the wind as…Read more Alex’s custom ENVE 3.4 team wheelset
Custom ENVE 25 & Dash Nikki/Monica 935g!
Okay, I could not resist building these. The Enve 25s are some of the lightest hoops on the market at a mere 250g per rim. When I saw the review of the new Dash Cycles Nikki (front) and Monica (rear) hub set, at 174g per set, I had to try this build. I chose Sapim…Read more Custom ENVE 25 & Dash Nikki/Monica 935g!
Enve 65 Alchemy ORC rear wheel
I was looking for something a bit more aero for time-trials and fast road races. I have an Enve 45 laced to a PowerTap SL+ as my 'everyday' wheel, but I think the Enve 65 would provide extra versatility and would not add weight. I chose my favourite rear hub, the Alchemy ORC, 24 holes.…Read more Enve 65 Alchemy ORC rear wheel
Emile’s ENVE 1.65/Phil Wood track wheel
Zed Wheel Works sponsors Emile de Rosnay, a 38 year old elite track cyclist. Emile will race on the track in 2011 with this Enve 1.65 tubular rim laced with Wheelsmith DB-14 2.0/1.7/2.0 butted spokes to a top-drawer black Phil Wood low-flange track hub. The wheel will be paired to an Enve 1.65 tubular rim laced…Read more Emile’s ENVE 1.65/Phil Wood track wheel
Cody’s Enve 65 + Alchemy ORC rear wheel – 842 grams!
Cody recently purchased two new Cervélo race bikes: an R3 for road racing and a P2 for Time Trials. When Cody bought these two bikes, the R3 came with Easton EC90SL 38mm carbon clinchers. The P2 came with basic Fulcrum wheels knowing he’d be finding some aero carbon wheels before the race season begins. It’s…Read more Cody’s Enve 65 + Alchemy ORC rear wheel – 842 grams!
